Repair is usually worth it when
- The unit is fairly new and structurally sound
- The fault is a sensor, gear, trolley, wall control or remote
- Settings have simply drifted out of adjustment
- Parts are still available for the model
LiftMaster · Chamberlain · Genie
Garage Door Opener Repair & Installation
When an opener hums but will not lift, reverses for no reason or ignores the remote, Garage Door Pro can repair it or install a new one. We work on LiftMaster, Chamberlain, Genie and other major brands, set up smart openers with myQ and program remotes and keypads. Before recommending a new opener we test the door itself, because a door problem often looks like an opener problem.
- Licensed & Insured
- Free Estimate
- Same-Day Service Available
What opener services do you provide?
We handle the opener and everything connected to it, including:
- Opener installation and replacement
- Opener repair and troubleshooting
- Smart openers and myQ setup
- LiftMaster and Chamberlain systems
- Safety sensor repair and alignment
- Remote, keypad and wall control programming
- Opener parts for residential and commercial doors
Can my garage door opener be repaired?
Often, yes. Many opener faults come down to one part: a sensor knocked out of line, a worn drive gear, a motor that hums without turning, a broken trolley, or travel and force settings that have drifted. Remotes and keypads that stopped working can usually be reprogrammed.
We find the fault first and tell you whether the repair is worth doing on your unit.
Which type of opener should I install?
Belt-drive openers are the quietest choice, which matters when a bedroom or living room shares a wall with the garage. Chain-drive openers are louder but tough, and they suit detached garages and workshops. Wall-mount (jackshaft) openers sit beside the door and turn the spring shaft directly, which keeps the ceiling free for storage or a high ceiling.
We install and service LiftMaster, Chamberlain and Genie openers, and we can install a unit you have already bought.
What is included in a new opener installation?
A full installation covers taking down and removing the old unit, mounting the rail and motor into solid framing, fitting and aligning the safety sensors near the floor, setting the travel and force limits, and pairing remotes, the keypad and app control where the model supports it.
We finish by checking the balance of the door, because a new opener on an unbalanced door will not last.
Why can a door problem look like an opener problem?
Openers are built to guide a balanced door, not to lift its full weight. When a spring breaks or a cable slips, the opener strains and stops, and it looks as if the motor has failed.
That is why we test the door by hand first. Sometimes the right fix is spring repair rather than a new opener.
Signs your garage door opener needs service
Most opener trouble shows up in one of these ways.
-
The motor hums but nothing moves
Often a failed motor part, a stripped gear or a door too heavy for the opener to lift.
-
The door reverses before closing
Sensors out of line or dirty, or a force setting that needs adjusting.
-
The remote or keypad stopped working
Lost pairing, a damaged keypad or an older system that no longer accepts new remotes.
-
Loud grinding or rattling
Worn drive parts, a slack chain or a rail that has worked loose from its mounting.
-
It works only some of the time
Intermittent response often comes from wiring, sensors, wall controls or connectivity.
-
No safety sensors at all
An opener without photo-eye sensors is outdated and should be replaced.
Repair your opener or replace it?
If a repair will keep your opener running reliably, that is what we recommend.
Replacement is usually the better spend when
- The opener is old and breaking down repeatedly
- The drive gear or circuit board has failed on an aging unit
- It has no photo-eye safety sensors
- You want a quieter drive, smart control or newer remotes
We will tell you which side of that line your opener falls on before any work starts.
How does an opener repair or installation work?
- 1
Check the door first
We test the balance of the door by hand, since a healthy opener depends on a balanced door.
- 2
Diagnose or recommend
For a repair we find the failed part; for a new unit we suggest a drive type that suits your garage.
- 3
Install or repair
Rail, motor, brackets and wiring are mounted securely, or the failed part is replaced.
- 4
Set the safety features and limits
Sensors are aligned and limits are set so the door seals at the floor and reverses on contact.
- 5
Program and test
Remotes, keypad, car buttons and app control are paired, then the opener runs through full cycles.
What affects the cost of opener work?
Opener work is quoted once we know your door and what you want the opener to do. Costs depend on:
Repair or replacement
Replacing a part or adjusting settings is a smaller job than a complete new unit.
Drive type and model
Belt, chain and wall-mount openers, and models with smart features, are priced differently.
Existing setup
A straight swap is simpler than a first-time installation or a change to a wall-mount unit.
Accessories
Extra remotes, keypads and smart connectivity add to the installation.
Condition of the door
If the door is out of balance, spring or cable work may be needed first.
We go through the options with you and confirm the price before anything is installed.
Why Garage Door Pro
Why homeowners and businesses call Garage Door Pro
Warranty protection
Warranty coverage varies by service and product. Manufacturer warranties apply where applicable, and a labor warranty is provided based on the specific service performed.
Brands we work with
- Windsor
- Unique
- Genie
- Marantec
- LiftMaster
- Clopay
- Amarr (Entrematic)
- Sommer
- Wayne Dalton
- Stanley
- Raynor
- Chamberlain
- Craftsman
- Linear
Licensed & insured, easy to reach
- Sun – Thu 6:00 AM – 11:00 PM
- Fri – Sat 6:00 AM – 10:00 PM
Before & After
Garage Door Openers FAQ
Can you repair garage door openers and remote systems?
Yes. We repair garage door openers, wall controls, safety sensors, keypads, remote controls, and smart garage systems. We troubleshoot issues such as doors not responding, intermittent opening, loud motors, and connectivity problems.
Which type of garage door opener is the quietest?
A belt-drive opener. It uses a reinforced belt in place of a metal chain, so it runs far more quietly, which is worth it when there is a bedroom or living space above or beside the garage.
Can you install an opener I already bought?
Yes. We can install a customer-supplied opener, set up its safety sensors and program its remotes. We check that it suits the size and weight of your door before mounting it.
Why does my garage door reverse before it closes?
Most often the photo-eye sensors near the floor are misaligned, dirty or have a loose wire, and the opener reverses whenever that beam is interrupted. Less often the force or travel settings need adjusting, or the door is binding in the track.
Do you set up smart openers and myQ?
Yes. We install smart openers and set up myQ, so you can open, close and check the door from your phone on models that support it.
Opener not responding?
Call us and describe what the opener is doing. We will check the door and the opener and tell you whether a repair or a new unit makes more sense.